INSTRUCTIONS FOR USE:

Before touching the mask, disinfect hands with hand sanitizer or wash hands with soap and water.
Before use, ensure that the particle filtering respirator mask including all components has no holes, drops, tears or other damage.

1.Open the mask and pull it first over the chin and then over the nose

2.Place the loops behind the ears and do not touch the mask. Make sure that the mask covers your nose, mouth and chin and that it is as tight as possible all around.

3.Preform the nose clip with your index fingers and adjust it to your nose.

Do not reuse your mask if it has been contaminated with body fluids following an aerosol exposure or if you cannot breathe freely.

Dispose of the mask in medical waste.

Remember that the outer surface of the mask is dirty, do not touch the outer surface with your hand.

After removing the mask, perform hand hygiene.

This respirator mask does not contain any natural rubber latex components. It can help reduce inhalation exposure to certain biological airborne particles (e.g. viruses, mold, bacteria and allergy-causing particles.)

WARNINGS: Danger! For safety reasons, this instruction manual must be read and understood thoroughly. Failure to follow the instructions and improper use of this protective mask, such as wearing it for too long, can impair the effectiveness of this respirator and lead to illness or even death. Please keep these instructions for reference. The ACTO® 95 respiratory mask was manufactured by ACTO® GmbH, in accordance with EU PPE regulation 2016/425.

NOTES TO THE USER: This respirator meets the requirements of EN 149:2001+A1:2009, filtering respirator for use against particulates. It should be used to protect the wearer from solids and airborne particles & aerosols. Proper selection, training, use and appropriate maintenance are critical to ensuring the product helps protect the wearer from certain airborne pollutants & aerosols. Before use, the wearer must be trained/instructed in the use of the complete respiratory mask in accordance with health and safety guidelines.

STORAGE: Store the new, unused respirator in the original packaging. Keep the mask away from contaminated areas, dust, direct sunlight, extreme temperatures, excessive moisture and harmful chemicals. The storage temperature should be between -25 °C and +40 °C.

Maximum relative humidity level during storage should be less than 80%.

Only use the respirators before the specified expiry date.

The expiry date is stated on the packaging.