Put on suitable protective clothing before use. Actoclean ^® Liquid is a concentrate that must be prepared in the desired concentration. The water temperature should be between 15°C and 45°C.

Use dosing pump to prepare the solution. The mixing ratio of concentrate and water as well as the duration of disinfection can be varied depending on the degree of contamination. Dismantle instruments/endoscopes after use and place them in the working solution for approx. 15 minutes. Make sure that all surfaces and cavities are wetted. Depending on the level of contamination, mechanical cleaning by brushing may be necessary. After disinfection, rinse the instruments/endoscopes thoroughly with water and dry them. Visually check instruments for cleanliness and repeat the process if necessary.

The working solution is intended for single use. After 24 hours, the unused working solution must be renewed. Do not store instruments in the solution for longer than the recommended exposure time, as the aqueous solution can cause long-term corrosion on sensitive instruments and devices.

The almost neutral pH value ensures excellent material compatibility.